Features:

*Made of PVC, a non-toxic recycled plastic-wood polymer composite material that won't warp, crack or split
*Vented side panels for optimal ventilation.
*Quick and easy assembly; No tools required
*Waterproof, moisture-proof, and will not rot
*Transparent acrylic sliding door, easy to grasp the situation of pets
*Intelligent thermostat, fully automatic constant temperature, giving pets the most comfortable growth temperature

Description:

Temperature control range: -50-100°
Temperature control accuracy: 0.1°
Material: PVC wood plastic board + glass

Size can be customized, other sizes need to be customized, you can contact us

Setting steps:

1. Press the setting key once, the number on the display will flash, use the up and down direction keys on the right to adjust to the highest temperature you want to set. (For example: if you want the highest temperature to be 30 degrees, then you set the temperature value to 30 just fine)
2. After confirming the maximum temperature, click the "ENT" button
3. Long press the setting button for 5 seconds, the display will show the word P0, use the up and down direction keys on the right to adjust to the word P1, for example: if you want the lowest temperature to be 28 degrees, then the number set for P1 is 2. Press the confirm key again. (P1 represents temperature difference)
4. In this way, the maximum temperature set by the thermostat is 30 degrees, and the minimum temperature is 28 degrees. When the temperature in the incubator reaches 30 degrees, the OUT indicator on the display will go out, and the heating lamp in the incubator will stop heating. When the temperature in the incubator is lower than the set 28 degrees, the heating lamp in the incubator starts to heat up, and the OUT indicator on the thermostat will light up at the same time.

Package:

1set reptile feeding cage(without other accessories)